Mirror screws installation guide

Mirror Screws: Recommended Use

A Guide to Fixing a Mirror to the Wall Using Mirror Screws:

• Use a temporary support against the wall to hold your mirror in place for the following next steps:
• Position the mirror and use a spirit level to make sure it is straight.
• Use a pencil to mark the positions of the mirror holes on the wall.
• Take down your mirror with care and drill the holes.
• Insert wall fixings into the wall to accept the screws.
• Position the mirror once again and (optional) insert rubber grommets into holes, before finally screwing the mirror into place.
• Make sure the mirror is secure but refrain from over-tightening the screws, which could damage the mirror or the wall.
• If desired, finish with decorative screw caps

Was this article useful? Please let us know.

Thanks,

The TC Fixings Team